Megger MGTR GPS timing reference product leaflet with features, specifications, applications, and ordering information for synchronized end-to-end relay…
The Megger MGTR is a small, lightweight, field-portable GPS satellite receiver system designed for end-to-end tests of line protection schemes with Megger SMRT, MPRT and Pulsar relay test systems. It uses a twelve-channel GPS timing receiver with microprocessor-controlled timing and interface logic and provides a programmable output pulse with 100 ns resolution.
The MGTR also provides 1 PPS, ASCII serial time messages, external event time tagging, a 10 MHz output, and Intelligent Holdover and FastStart features. It is supplied with a 50 ft cable and all-weather antenna, is controlled through RS-232, and includes software. The document covers features, specifications, ordering information and optional accessories.
| Input Power | AC/DC adapter, 90 to 265 VAC, 47-63 Hz to 24 VDC, 400 mA, with 4-plug kit |
|---|---|
| Disciplined Oscillator | High-performance ovenized crystal control (OCXO) |
| Long-Term Stability | 1 x 10–12 after 24 hours tracking |
| Accuracy While Coasting | 1 x 10–10 per day after 3 days of locked operation |
| Receiver Type | 12 parallel channel, code + carrier tracking, CA mode, L1 carrier |
| Time to First Fix | Hot start < 30 seconds; warm start < 60 seconds; cold start < 3 minutes typical, 12.5 minutes max |
| Position Update Rate | Once per second, nominal |
| Programmable Output Pulse Drive | TTL into 50Ω |
| Pulse Width | Programmable from 1 µs to 250 ms |
| Pulse Resolution | 100 ns |
| Pulse Accuracy | 100 ns RMS |
| External Event Input | TTL/CMOS level, edge-triggered, polarity selectable |
| MUX 1 Output | 1, 10, 100 kHz, 1, 5, 10 MHz, 1 PPS |
| 10 MHz Output | High spectral purity sinewave, +10 dBm into 50Ω, ±2 dB |
| Operating Temperature | 14 to 158°F (-20 to 70°C) |
| Dimensions | 4.125 W x 1.5 H x 4.0 D in. (104.8 W x 38.1 H x 101.6 D mm) |
| Weight | 1.0 lbs. (0.453 kg) |
| Safety | IEC 61010-1, amendments 1 and 2 |
It is a field-portable GPS satellite receiver system for end-to-end tests of line protection schemes with Megger SMRT, MPRT and Pulsar relay test systems.
The programmable output pulse has 100 nanoseconds of resolution and 100 ns RMS accuracy.
The Intelligent Holdover feature provides near-Rubidium holdover characteristics, allowing high-accuracy triggering without GPS timing signals.
Control is through a standard RS-232 serial connection and an adapter cable with a 9-pin D-sub connector; software is provided.