Chinese installation guide for Kohler C3 K-4737T/K-4753T/K-4772T/K-R4737T/K-R4753T bidet seats, with dimensions, mounting, water connection, and checks.
This Chinese installation guide covers the Kohler C3 K-4737T/K-4753T/K-4772T/K-R4737T/K-R4753T toilet seat with bidet functionality. It gives the toilet fit dimensions, power outlet requirements, and water supply requirements before installation.
The steps cover removing the old seat, preparing the water supply, installing the mounting plate and seat, connecting the water supply, and checking for leaks and operation. Safety warnings include grounding, a dedicated 220 V AC 50 Hz 10 A circuit, and not immersing the product in water. This manual is written in Chinese.
| Power supply | 220 V AC, 50 Hz, 10 A dedicated circuit with ground-fault circuit breaker or leakage protector |
|---|---|
| Water supply pressure | 0.7–7.5 kgf/cm² (0.07–0.74 MPa) cold water |
| Mounting hole spacing | 136–140 mm |
| Distance from mounting holes to tank | >20 mm |
| Distance from mounting holes to bowl inner ring | <70 mm |
| Distance from mounting holes to toilet top | 460–490 mm |
| Toilet bowl inner diameter | 370–390 mm |
| Power outlet location | Within about 1 m on the left side of the toilet |
It requires a dedicated 220 V AC, 50 Hz, 10 A grounded circuit protected by a ground-fault circuit breaker or leakage protector.
The cold water supply must be 0.7–7.5 kgf/cm² (0.07–0.74 MPa).
The mounting holes must be spaced 136–140 mm apart.
Place a hand or a damp cloth on the sensor area on the right side of the seat, about one-third from the front.