Chinese user manual for Kohler CV173, CV200 and CV224 engines covering safety warnings, starting and stopping, maintenance schedule and oil recommendations.
This Kohler user manual covers the CV173, CV200 and CV224 engines. It opens with safety precautions about explosive fuel, hot parts, rotating parts, accidental starting and carbon monoxide, and includes a labeled diagram of the engine's main components such as the starter handle, oil filler cap/dipstick, oil filter, fuel tank, air cleaner and spark plug.
The manual then describes pre-start checks, cold and warm starting procedures, stopping, operating angle and engine speed notes, high-altitude operation, a maintenance schedule with hour-based intervals, and oil recommendations with a viscosity chart and dipstick oil-level check instructions. This manual is written in Chinese.
| Recommended oil viscosity grades | 5W-30, 10W-30, SAE 30 (chosen by ambient temperature) |
|---|---|
| Minimum API oil service grade | SJ or higher |
| Altitude requiring a high-altitude carburetor kit | 4,000 ft (1,219 m) and above |
Check the oil level and fuel level, look for leaks in the fuel system components and lines, and check that cooling areas, the air intake and the air cleaner parts and guards are clean and secure. Also check the spark arrestor if equipped.
Kohler oil is recommended; other high-quality detergent oils meeting API service grade SJ or higher may also be used, with viscosity selected from the chart according to ambient temperature.
The oil is changed after the first 8 hours, then every 100 hours or once a year, whichever comes first.
If the engine is to run at 4,000 ft (1,219 m) or above, a high-altitude carburetor kit is required; below that altitude the original configuration should be used.