Kohler installation guide for 18358T-CL, 18359T-CL, 18360T-CL, 18361T-CL and 15990T-CL to 15994T-CL showerheads, with dimensions, pressure limits and…
This is the Kohler installation guide (document 1267342-2-A) for the 随心雨 showerhead in models 18358T-CL, 18359T-CL, 18360T-CL, 18361T-CL, 15990T-CL, 15991T-CL, 15992T-CL, 15993T-CL and 15994T-CL. It gives the points to check before installation, the installation dimensions for each model, the installation steps for fitting the showerhead to the shower arm, and cleaning instructions.
Before installation the supply pipe must be flushed to remove debris. The recommended working pressure is 2 to 5 bar, the maximum working pressure is 0.5 MPa (5 bar) and a pressure reducing valve is required above that; the maximum water and ambient temperature is 60ºC. The guide also warns that the arm carrying the showerhead must be kept away from a bathroom heater, and that plated surfaces should be cleaned only with neutral soapy water and a soft cloth, not with ammonia, scouring powder or toilet cleaner. A service parts diagram is included. This manual is written in Chinese.
| Recommended working pressure | 2~5 bar |
|---|---|
| Maximum working pressure | 0.5 MPa (5 bar) |
| Maximum working and ambient temperature | 60ºC |
The recommended working pressure is 2 to 5 bar. The maximum working pressure is 0.5 MPa (5 bar), and a pressure reducing valve must be installed if the pressure is higher.
The maximum working water temperature and ambient temperature is 60ºC.
The supply pipe must first be thoroughly flushed to remove debris, and the water should be opened to rinse away impurities before the showerhead is fitted.
Yes, if needed a flow restrictor can be fitted before the showerhead: remove the gasket, place the restrictor in the direction shown and refit the gasket.