GYS GYSFLASH 3.48 PL 48 V battery charger user manual covering safety, lead-acid, LiFePO4 and lithium charging modes, specifications and troubleshooting.
The GYS GYSFLASH 3.48 PL is a 48 V battery charger intended for most lead-acid batteries (gel, AGM, liquid), LiFePO4 batteries and standard lithium batteries such as NMC, NCA, LCO and Li-Po. It charges 48 V packs with different series-cell configurations and adjusts its output voltage according to ambient air temperature.
The manual explains safety rules, connections, start-up, charging modes and the 7-step lead-acid and 8-step lithium charging curves. It also lists estimated charging times, protection functions, troubleshooting indications, warranty terms and technical specifications. This manual is written in Chinese.
| Reference | 027893 |
|---|---|
| Rated supply voltage | 220-240 VAC, 50/60 Hz |
| Rated power | 195 W |
| Rated output voltage | 48 V DC |
| Rated output current | 3 A |
| Rated battery capacity (Pb) | 6-60 Ah at 48 V |
| Rated battery capacity (Lithium) | 3-60 Ah at 48 V |
| Idle battery consumption | < 0.5 mA |
| Ripple | < 100 mV rms |
| Charging curve | IUOU |
| Operating temperature | -20°C to +40°C |
| Storage temperature | -20°C to +80°C |
| Protection index | IP 65 |
| Noise level | < 50 dB |
| Weight | 1.1 kg |
| Dimensions (L x H x W) | 221 x 111 x 56.5 mm |
It can charge most lead-acid batteries (gel, AGM, liquid), LiFePO4 batteries and standard lithium batteries such as NMC, NCA, LCO and Li-Po.
Connect the charger to the battery, connect it to a 220-240 VAC 50-60 Hz single-phase supply, press the button for 3 seconds to unlock, select the mode, and charging starts automatically after about 5 seconds.
The rated output current is 3 A.
The manual states protection against short circuits and battery polarity reversal, plus a spark prevention system, double insulation and an internal temperature sensor.