Gurit Ampreg 36 is a low toxicity premium epoxy wet laminating system for high-performance composite structures, with Fast to Extra Slow hardeners.
Ampreg 36 is Gurit's premium epoxy laminating system, formulated for the manufacture of large, high-performance composite structures. It uses low toxicity raw materials and Gurit LRT (Light Reflective Technology), and is offered with hardener speeds from Fast to Extra Slow.
The system is optimised for hand lay-up and vacuum bagging, and can also be used in RTM, vacuum infusion, pultrusion and filament winding. It is recognised worldwide for racing sailboats and high-performance one-off cruising boats, with a shelf life of 2 years for resin and hardeners when stored between 10°C and 25°C.
| Mix ratio | 100:29 resin to hardener by weight |
|---|---|
| Shelf life | 2 years |
| Storage temperature | 10°C to 25°C |
| Maximum relative humidity | 70% |
| Mixed viscosity (Fast hardener) | 700 cP |
A uniform 100:29 resin to hardener mix ratio by weight is used across the range of hardener speeds.
Both the resin and hardeners have a shelf life of 2 years under adequate long term storage conditions.
The maximum relative humidity for use is 70%.
It is optimised for hand lay-up and vacuum bagging, and can also be used in RTM, vacuum infusion, pultrusion and filament winding.