Gurit Ampreg 30 Low Viscosity Epoxy Wet Laminating System Full General Datasheet

Gurit Ampreg 30 is a low viscosity epoxy wet laminating system for large composite structures using hand layup and vacuum bagging.


Gurit Ampreg 30 Low Viscosity Epoxy Wet Laminating System Full General Datasheet - cover page
Brand
Gurit
Category
Chemical products
Document type
Datasheet
Language
English
Pages
8
File format
PDF
File size
460 KB
Published
13 November, 2026
Updated
13 November, 2026
MD5 checksum
2D23DBCF24905CB6DCDB0E91AADBFEBC

About this manual

Gurit Ampreg 30 is a low viscosity epoxy wet laminating system optimized for manufacturing large composite structures by hand layup and vacuum bagging. It offers low initial mixed viscosity, good cure progression from ambient-only cures, and tough resin matrix properties from ambient cures and moderate 50°C postcures.

The system is available with Ampreg 3X hardeners from Fast to Extra Slow, uses a 100:26 resin to hardener mix ratio by weight, and includes low toxicity hardener formulations, Gurit LRT, and DNV-GL and Lloyds Register certified formats.

What's inside

  • Introduction
  • System Properties at 25°C
  • Product Information
  • Availability
  • Transport & Storage
  • Instructions for Use
  • Mould Release
  • Mixing and Handling
  • Application
  • High RH During Lamination

Specifications

Mixed viscosity (Fast hardener)900 cP
Pot life (Fast hardener)0.5 hour
Earliest time to apply vacuum (Fast hardener)1.5 hours
Latest time to apply vacuum (Fast hardener)2 hours
Earliest demould time (Fast hardener)3 hours
Shelf life24 months
Storage temperature10-25°C
Mix ratio100:26 resin to hardener by weight
Maximum relative humidity for use70%
Moderate temperature postcure50°C
Hardener speed rangeFast to Extra Slow
CertificationDNV-GL and Lloyds Register certified formats available

Frequently asked questions

What is the mix ratio for Ampreg 30?

The mix ratio is 100:26 resin to hardener by weight across the hardener range.

What is the shelf life of Ampreg 30 resin and hardeners?

The shelf life is 24 months under adequate long-term storage conditions.

What is the maximum relative humidity for use?

The maximum relative humidity for use is 70%.

Can Ampreg 3X hardeners be blended?

Ampreg 3X Fast and Extra-slow hardeners can be blended to achieve intermediate speeds.

Download PDF (460 KB)

More Gurit Manuals


View all Gurit manuals →