Operating manual for the GE Everest XLG3 VideoProbe system, a video-based flexible borescope for remote visual inspection.
The Everest XLG3 VideoProbe system is an advanced video-based flexible borescope from GE Inspection Technologies used for remote visual inspection of turbine engines, airframes, automotive engines, piping, vessels, wind-turbine gear boxes, underwater structures, and similar equipment. Its probe illuminates the inspection area with a 75-watt high-intensity discharge arc lamp, and a miniature camera at the probe tip sends images to the handset display; the system has a fixed-focus optical system with a large depth of field, so no focusing is required.
The manual covers setup, software settings, image and video capture, file management and communication with other computers, measurement of features and defects, maintenance, troubleshooting, specifications, and other reference information. It is written for visual inspection technicians familiar with basic computer operations and inspection principles, and it does not include repair information.
| Power (AC) | AC 100 – 240 V, 50 – 60 Hz; 115 V, 400 Hz |
|---|---|
| Power (DC, optional battery) | 11 – 16 V |
| Maximum power consumption | 300 W |
| Nominal power consumption | 150 W (when not charging battery or using accessories) |
| Battery operation | Up to one hour (small battery) or two hours (large battery) |
| AC output | IEC-type F connector; same voltage and frequency as inlet; maximum 100 W |
| Maximum AC output | 100 W |
| Arc lamp | 75-watt high-intensity discharge (HID) |
| AC fuse | 6.3 A, 250 V, fast acting |
| DC fuse | 20 A, 600 VDC, fast acting |
| System operating temperature | -4° to 115°F (-20° to 46°C) |
| LCD warm-up | Below 32°F (0°C) |
| Tip operating temperature | -13° to 176°F (-25° to 80°C) |
| Reduced articulation | Below 32°F (0°C) |
| Storage temperature | -13° to 140°F (-25° to 60°C) |
| Relative humidity | 95% maximum, non-condensing |
| Waterproofing | Insertion tubes watertight to 1 bar (14.5 psig, 10.2 m [33.5 ft] of H2O) |
| Hazardous environments | Not rated for use in hazardous environments |
| Case dimensions (standard) | 54.6 x 49.5 x 32.0 cm (21.5 x 19.5 x 12.6 in) |
| Case dimensions (tall) | 54.6 x 60.9 x 32.0 cm (21.5 x 24 x 12.6 in) |
| Weight in case | 21.8 kg (48 lb) |
| Weight without case | 10.9 kg (24 lb) |
| QuickChange probe diameters | 6.1 mm (0.242 in), 5.0 mm (0.197 in), and 8.4 mm (0.331 in) |
| Image sensor | 1/6-inch color SUPER HAD CCD |
| Pixel count | 440,000 pixels |
| Temperature sensor | Integrated temperature warning system |
It is an advanced video-based flexible borescope used for remote visual inspection of equipment such as turbine engines, airframes, piping, vessels, and underwater structures.
No. It contains a fixed-focus optical system with a large depth of field.
It is compatible with DVD-R, DVD+R, compact Flash cards (Type 1), USB thumb drives, and most compatible USB-based or compact Flash card-based devices.
Up to one hour with the small battery or two hours with the large battery.