Electrolube UVCL UV Cure Conformal Coating Product Leaflet

Electrolube UVCL is a low-viscosity, single-part UV cure conformal coating for electronic circuitry, with a secondary moisture cure for shadow areas.


Electrolube UVCL UV Cure Conformal Coating Product Leaflet - cover page
Brand
ELECTROLUBE
Category
Electronic Original
Document type
Product Leaflet
Language
English
Pages
3
File format
PDF
File size
756 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
295A085B31EF40768414A3C5A834485A

About this manual

Electrolube UVCL is a low-viscosity, single-part conformal coating that cures rapidly under the correct dose of UV light. A moisture-initiated secondary cure helps complete curing in shadowed areas, and the coating is intended for selective spray application and automation on electronic circuits at high production throughputs.

The leaflet lists liquid properties, approvals, packaging, directions for use, UV lamp output ranges, and inspection guidance. It also notes that UVCL contains a fluorescent dye for blacklight inspection of coverage.

What's inside

  • UV Cure Conformal Coating
  • Approvals
  • Liquid Properties
  • Packaging
  • Directions for Use
  • Spraying
  • Brushing
  • Curing
  • UV Lamp Outputs
  • Inspection

Specifications

AppearancePale Yellow Liquid
Base materialUrethane acrylate
Density at 20°C1.1 g/ml
Solids content100%
VOC content0%
Flash point>90 °C
Viscosity at 25°C225 - 400 mPa s
Coverage at 100 µm10 m2/litre
Dry film coating colourColourless
Operating temperature range-65°C to +135°C
Surface insulation resistance1 x 10^15 Ω
Dielectric strength27 kV/mm
Dielectric constant at 1 MHz2.5
Dissipation factor at 1 MHz, 25°C0.01
FlammabilityUL94 V-0
Moisture resistance (IPC-CC-830)7 x 10^12 Ω
Thermal shock (IPC-CC-830, -65°C to +125°C)Pass 100 Cycles
Additional thermal shock (-40°C to +125°C)Pass >1000 Cycles
Glass transition temperature (DMA)7°C
Tensile strength (BS EN ISO 537)2.7 MPa @ 20°C
Elastic modulus (BS EN ISO 537)2940 MPa @ -40°C; 2.2 MPa @ 25°C; 2.2 MPa @ 130°C
Elongation at break (BS EN ISO 537)100%
RoHS Compliant (2015/863/EU)Yes
IPC-CC-830Meets Requirements
IEC-61086Meets Requirements
UL746-QMJU2Approved: File Number E138403
Typical coating thickness100 - 200 µm
Recommended conveyor speed1.0 - 1.5 m/min
UVA dosage range1800 - 2800 mJ/cm2
UVA intensity range350 - 500 mW/cm2
Inspection wavelength375 nm
Shelf life, 4 Litre Bulk12 Months
Shelf life, 5 Litre Industrial Machine Cleaner36 months

Frequently asked questions

What type of coating is Electrolube UVCL?

It is a low viscosity, single-part conformal coating that cures rapidly on exposure to the correct dose of UV light.

How does UVCL cure in shadow areas?

A moisture-initiated secondary cure mechanism ensures curing in areas not exposed to UV light.

Does UVCL require dilution before selective spray application?

No. It is supplied ready to use at a viscosity suitable for selective spraying, with no dilution required.

How is coating coverage inspected?

UVCL contains a fluorescent dye for blacklight inspection of the PCB, using UV light in the region of 375 nm.

Download PDF (756 KB)

More ELECTROLUBE Manuals


View all ELECTROLUBE manuals →