Clear-Com PS-10/PS-10K Power Supply Instruction and Service Manual

Clear-Com PS-10/PS-10K power supply instruction and service manual covering system interconnection, 220 VAC operation, troubleshooting, and specifications.


Clear-Com PS-10/PS-10K Power Supply Instruction and Service Manual - cover page
Brand
Clear-Com
Category
Communications equipment
Document type
Service Manual
Language
English
Pages
11
File format
PDF
File size
266 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
2EC043C1B3570E4E141161E47C08FA09

About this manual

The PS-10 is a single-channel power supply available as a portable unit (PS-10) or a 3-1/2-inch rack-mount unit (PS-10K). It supplies 28 volts DC at 0.6 amps for up to 15 headset stations or 5 speaker stations and has a front-panel circuit breaker with a short indicator.

The document covers the Clear-Com concept, interfacing with other systems, system interconnection and cable selection, system setup, 220 VAC operation, multiple power sources, troubleshooting, warranty and maintenance, and specifications. It also includes RS-100A Belt-Pack operating instructions.

What's inside

  • The Clear-Com Concept
  • Introduction to the PS-10 Power Supply
  • Interfacing with Other Systems
  • System Interconnection
  • Choosing Interconnect Cable
  • System Set-Up Procedure
  • 220 VAC Operation
  • Multiple Power Sources
  • Trouble-Shooting
  • Specifications

Specifications

Power output28 volts DC at 0.6 amps
220 VAC fuse1/8 A slo-blo fuse
Intercom connector pinoutPin 1 Common; Pin 2 +VDC; Pin 3 Intercom Audio
Chassis-to-signal-ground capacitor.01 microfarad, 1.4 kV

Frequently asked questions

What are the pin assignments on Clear-Com intercom connectors?

Pin 1 is Common, Pin 2 is +VDC, and Pin 3 is Intercom Audio.

How much power does the PS-10 supply?

It supplies 28 volts DC at 0.6 amps.

Download PDF (266 KB)

More Clear-Com Manuals


View all Clear-Com manuals →