Configuration guide for Cisco MDS 9000 Family switches in interop mode 1 with Brocade edge switches.
This guide describes a core-edge topology with two Cisco MDS 9000 switches in interop mode 1 at the core and Brocade switches at the edge. It covers expected topology behavior, configuration steps, verification, and zoning.
The example uses an MDS 9509 with SAN-OS Release 1.0(1) and Brocade 3800, 3200, and 2400 switches. It also documents domain ID limits, Fibre Channel timer defaults, and interop mode settings.
| Example core switch | MDS 9509 running SAN-OS Release 1.0(1) |
|---|---|
| Example Brocade 3800 software | Version 3.0.2 |
| Example Brocade 3200 software | Version 3.0.2 |
| Example Brocade 2400 software | Version 2.4.1h |
| Domain ID range | 97 to 127 |
| Default RA_TOV | 10 seconds |
| Default ED_TOV | 2 seconds |
The example uses interop mode 1.
Domain IDs are restricted to the range 97 through 127.
RA_TOV defaults to 10 seconds and ED_TOV defaults to 2 seconds.
Set interoperability mode to on at the command line and then reboot the switch.