Guide to upgrading Brocade Fibre Channel switch Fabric OS firmware: FTP server setup, config backup, non-disruptive firmwaredownload and verification.
This document is a walk-through by Didier Van Hoye on upgrading the firmware on a Brocade Fibre Channel switch. It first covers the infrastructure and preparation: having an FTP/SFTP/SCP server in place, downloading the correct Fabric OS (FOS) firmware for the switch from the Brocade download page for DELL customers and checking it against the Brocade FOS 7.x Compatibility Matrix, and making a backup copy of the switch configuration with the configupload command.
The second part describes the upgrade itself. At the console prompt the firmwaredownload command is used for a non-disruptive upgrade, which performs a High Availability (HA) reboot while the FC ports stay online; a disruptive upgrade uses firmwaredownload -s and takes the switch out of action. The guide lists example non-disruptive and disruptive upgrade paths, explains verification of the reported version over SSH after the HA reboot, and recommends completing one fabric before moving on to the second fabric.
Yes. Upgrading within a major version or to the next major version can be done as a non-disruptive upgrade with an HA reboot, during which the FC ports stay online and data traffic keeps flowing.
At the console prompt you type firmwaredownload. For a disruptive upgrade you use firmwaredownload -s instead.
Log in over telnet or ssh and run configupload, then choose the protocol, enter the server IP address and user name, and give the backup file a clear name.
No. Start with one fabric and complete the upgrade there, and only move on to the second fabric after everything is proven well.