QuickStart Guide for installing and configuring the Brocade SilkWorm 4100 switch, including site planning, mounting, and configuration steps.
This guide helps experienced installers quickly unpack, install, and configure the Brocade SilkWorm 4100 switch. It covers site planning, safety guidelines, mounting options, and configuration tasks such as setting IP addresses and connecting Ethernet cables. The guide references additional manuals for detailed steps and includes diagrams for port and nonport side views.
The switch supports Fabric OS v4.4.0 and requires specific power, cooling, and environmental conditions for proper operation. Installation can be done as a standalone unit or in an EIA cabinet using provided rack mount kits. Configuration requires a workstation, serial cable, Ethernet cable, and SFP transceivers.
| Supported Fabric OS Version | v4.4.0 |
|---|---|
| Power Input | 100-240 V AC, 47-63 Hz |
| Cooling Requirement | Minimum 47 cubic feet/minute (79.8 cubic meters/hour) airflow |
| Operating Temperature | Up to 40 °C (104 °F) |
The SilkWorm 4100 supports Fabric OS v4.4.0.
The switch requires 100-240 V AC, 47-63 Hz input voltage.
A minimum of 47 cubic feet/minute (79.8 cubic meters/hour) of airflow is required.
The switch must operate in ambient temperatures up to 40°C (104°F) and humidity between 20% and 85%.