Beam IsatDock Lite (ISD LITE) Docking Station FAQ

FAQ for the Beam IsatDock Lite (ISD LITE) docking station covering power, charging, USB connection, data setup, firmware and SIM use.


Beam IsatDock Lite (ISD LITE) Docking Station FAQ - cover page
Brand
Beam
Category
Communications equipment
Document type
Other
Language
English
Pages
16
File format
PDF
File size
509 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
2C773FB4EA1CABC376E3A1B8F7B09086

About this manual

The IsatDock Lite (ISD LITE) FAQ is a troubleshooting document for a Beam docking station used with the IsatPhone Pro. It covers powering up and restarting, checking power and ignition connections, keeping the IsatPhone Pro powered in the dock, charging prompts and battery charging behavior, and USB connection between the phone and dock.

It also gives the 4-way DC connector pinout, steps for setting up data service with a standard USB modem driver, firmware upgrade guidance, Falcon tool installation notes for Windows 8, error-code information, and the default supervisor PIN for Beam products.

What's inside

  • Powering Up/Restarting
  • No Power on IsatDOCK
  • IsatPhone Pro connection
  • Battery charging
  • DC connector pinout
  • DATA
  • Firmware / Software / Configuration
  • Falcon tool on Windows 8
  • Supervisor PIN and Security Code

Specifications

DC connector pin 1ACC
DC connector pin 2GND (0 V)
DC connector pin 4Constant Vin (+ve)
Power supply requirementAt least 3.5 A at 12 V
Battery charging temperature range0 to 45 °C (32 to 113 °F)
Charging restart thresholdBelow 4.1 V
Default supervisor PIN3170

Frequently asked questions

Why does my IsatDock power off after the ignition is switched off?

It is normal operation. Connecting the ACC cable to a constant power source on the vehicle or vessel will rectify this if that scenario is required.

What should I do if the IsatPhone Pro does not stay powered on in the dock?

Remove the IsatPhone Pro, remove the battery, reinsert it, and place it back in the docking station so the connection is firm and clicks into place.

What is the pinout of the 4-way connector on the docking station?

Pins 1, 2 and 4 are used: Pin 1 is ACC, Pin 2 is GND (0V), and Pin 4 is Constant Vin (+ve).

Can I use a Fleet SIM card in my Terra terminal or IsatDOCK?

No. A Fleet SIM card is designed for the Inmarsat Fleet maritime satellite phone service and will only work successfully in an Oceana Unit.

Download PDF (509 KB)

More Beam Manuals


View all Beam manuals →