AMD quick start guide for setting up RAID mode on Windows: copy AMD-RAID drivers, enable RAID in BIOS, create a bootable virtual disk and install RAIDXpert2.
This AMD quick start guide (Publication # 56268, Revision 1.11, December 2022) describes how to set up a Windows x64 system in RAID mode. It covers the system requirements, copying the AMD-RAID drivers to removable storage such as a FAT32 USB flash drive, loading those drivers during Windows installation, and installing the AMD RAIDXpert2 management suite and GUI for array management.
The guide explains how to enable RAID in the platform BIOS for AMD X570 chipset with socket AM5 processors, older AM4-compatible processors, SP3-series chipsets and FP6 processors, and how to create a bootable virtual disk using the RAIDXpert2 Configuration Utility (HII mode) or the UEFI shell command line. A final chapter covers updating the RAIDXpert2 management suite and the AMD RAID Windows drivers.
| Memory (RAM) | Minimum 16 GB total, recommended 32 GB total for AMD Ryzen processors |
|---|---|
| Hard disk / SSD devices | Total 14 devices (ATAPI DVD, SATA drives, SATA SSD, M.2 SATA, NVMe M.2, NVMe HHHL, NVMe U.2) |
| Max number of NVMe devices | 10 |
| Max controller count | 11 |
| Supported AMD processors | AMD Ryzen Threadripper, AMD Ryzen Desktop, AMD Ryzen Mobile with Radeon Graphics, AMD A-Series (7th Gen) |
| Supported AMD chipsets | A520, A320, TRX40, WRX80, B650E / B650, B550, B450, B350, X670E / X670, X570, X470, X399, X370 |
The minimum is 16 GB total for AMD Ryzen processors and AMD Ryzen desktop processors; 32 GB total is recommended.
A USB flash drive formatted as FAT32 can be used, or a blank CD-DVD disk inserted into the applicable drive.
In the BIOS Advanced tab, open AMD CBS, then FCH Common Options, then SATA Configuration Options, and set SATA Mode to RAID.
A total of 14 devices are supported, and the maximum number of NVMe devices is 10.