User manual for the AirLive VoIP-111A and VoIP-120A SIP VoIP ATA adapters, covering keypad IVR codes, web configuration and SIP settings.
This user's manual covers the AirLive VoIP-111A (1 FXS + 1 FXO ports, one IP phone with PSTN backup) and VoIP-120A (2 FXS ports, two IP phone calls) SIP VoIP ATA adapters. It explains the IVR instructions, web configuration and command line configuration needed to set the ATA up and use it.
The manual describes the hardware interfaces and software protocols, the keypad interface with its IVR access codes for an analog phone set, and the web management pages: login and system status, phone book, dial plan and call services, WAN/DDNS/VLAN/VPN/NTP network settings, NAT and virtual server, SIP service and advanced settings including STUN, plus management functions such as logs, auto provision, firmware upgrade, password, tone settings, save and reboot and logout.
| Telephone Ports | VoIP-111A: 1 FXS + 1 FXO; VoIP-120A: 2 FXS |
|---|---|
| Network Interfaces | Two RJ-45 10/100 Mbps Fast Ethernet ports (WAN and LAN) |
| Analog Telephone Jacks | Two RJ-11 analog telephone jacks |
| LED Indicators | Power, Register and Off-Hook |
| Voice Codecs | G.711, G.726, G.729A, G.729B, G.723.1 |
| SIP Protocol | SIP v1 (RFC2543), v2 (RFC3261) |
| SIP Accounts | Five SIP accounts |
| IP Assignment | Static IP, DHCP, PPPoE |
| Configuration Methods | Web browser, Telnet, IVR/Keypad |
| NAT Traversal | STUN |
Off-hook the analog phone and dial #198#; the system reboots automatically and all user-changeable non-default settings are lost.
Dial 0* to route your call to the PSTN line directly from the analog phone set; this applies to the VoIP-111A only.
The ATA can be configured through a web browser, Telnet, or the IVR/keypad from an analog phone.
Dial #195#; after the IVR says "Option Successful", hang up and the system reboots automatically.