This guide walks you through unpacking the MFC‑J615W, checking that all components are present, and safely connecting the power and telephone lines. It then shows how to load A4 paper, install the supplied ink cartridges, and perform the initial print‑quality check.
Further sections cover language selection, setting the date, time and machine ID, configuring fax and dialing modes, adjusting phone‑line compatibility for VoIP, and installing optional software and network drivers. The guide ends with instructions for replacing consumables and accessing support resources. This manual is written in Chinese.
| USB cable length | ≤ 2 m |
|---|---|
| Network cable type | Cat‑5 or higher |
Pull the paper tray out, adjust the width and length guides to the A4 size, place the paper face‑down with the top edge first, then push the tray back into the printer.
Open the cartridge cover, remove the protective tape, align the cartridge with the arrow on the label, and push it forward until it clicks into place.
Use a straight‑through Category‑5 (or higher) twisted‑pair cable for 10BASE‑T or 100BASE‑TX Ethernet.