The Dell OptiPlex 7080 Micro Dust Filter Installation Guide provides instructions on how to install the dust filter.
This 7-page guide from Dell explains how to install the dust filter for the OptiPlex 7080 Micro. It starts with preparation steps such as saving open files, shutting down the system, and disconnecting power, network, and peripheral cables, and it notes cautions for disconnecting network cables and for working with a monitor-mounted system.
The installation chapter describes aligning the top edge of the dust filter with the top edge of the system and pressing the lower edge until the filter fits snugly. It then covers setting a dust filter maintenance reminder in the BIOS under System Configuration > Dust Filter Maintenance at intervals of 15, 30, 60, 90, 120, 150, or 180 days, reconnecting devices afterwards, and contacting Dell for help.
| Dust filter maintenance intervals in BIOS | 15, 30, 60, 90, 120, 150, or 180 days |
|---|---|
| Default dust filter reminder setting | Disabled |
| BIOS path for dust filter maintenance | System Configuration > Dust Filter Maintenance |
| Guide revision | Rev. A00, November 2020 |
Align the top edge of the dust filter with the top edge of the system, press the lower edge to close it over the system, then gently press down so the filter fits snugly.
Restart the system, press F2 at the Dell splash screen, then go to System Configuration > Dust Filter Maintenance in the BIOS Setup menu and select an interval of 15, 30, 60, 90, 120, 150, or 180 days.
Brush or gently vacuum the dust filter, then wipe down the external surfaces with a moist cloth.
Alerts are generated only during a system reboot, not during normal operating system operation.