Dell Networking 320 Series Access Points Installation Guide
The Dell Networking 320 Series access points W-AP324, W-AP325, W-IAP324, and W-IAP325 support IEEE 802.11ac standards and are equipped with two dual-band radios for simultaneous access and network monitoring. The W-AP324 and W-AP325 work with a Dell controller, while the W-IAP324 and W-IAP325 Instant access points can be configured using a built-in virtual controller.
The guide covers package contents, software requirements, hardware overview, LEDs, external antenna connectors, USB interface, console port, Ethernet ports, Kensington lock slot, reset button, power, power modes, and the pre-installation checklist. It states that the W-AP324 and W-AP325 require AOS 6.4.4 or higher, and the W-IAP324 and W-IAP325 require Instant 4.2.1 or higher.
| Wireless standard | IEEE 802.11ac |
|---|---|
| Radios | Two dual-band radios |
| PoE compatibility | IEEE 802.3at PoE+ and 802.3af PoE |
| Ethernet ports | Two 10/100/1000 Base-T (RJ-45) |
| USB power | Up to 5W |
| DC power jack | 12V/30W |
| External antenna connectors | Four on the 324 model |
| Bluetooth | Integrated Bluetooth Low Energy (BLE) radio |
| W-AP software requirement | AOS 6.4.4 or higher |
| W-IAP software requirement | Instant 4.2.1 or higher |
They require AOS 6.4.4 or higher.
They require Instant 4.2.1 or higher.
Power off the access point, then press and hold the reset button with a small, narrow object such as a paperclip while powering it on.
The second Ethernet port is disabled, the USB interface is disabled, and 2.4 GHz operates in 1x1:1 mode.