Dell™ S199WFP Flat Panel Monitor User's Guide
The Dell S199WFP User's Guide describes a 19-inch active matrix TFT LCD flat panel monitor with VGA and DVI-D inputs. It covers monitor views, specifications, stand assembly and removal, cable organization, tilt adjustment, connections, front panel buttons, OSD operation, optimal resolution, and the optional Dell Soundbar.
The guide also includes power management modes, connector pin assignments, preset display modes, electrical and physical characteristics, environmental conditions, cleaning instructions, and general and product-specific troubleshooting.
| Model number | S199WFP |
|---|---|
| Screen type | Active matrix - TFT LCD |
| Screen dimensions | 19 inches wide (19-inch wide viewable image size) |
| Viewing angle | 160° vertical typical, 160° horizontal typical |
| Luminance output | 300 CD/m² typical |
| Contrast ratio | 1000 to 1 typical |
| Response time | 5 ms typical |
| Optimal preset resolution | 1440 x 900 at 60 Hz |
| Highest preset resolution | 1440 x 900 at 75 Hz |
| Video input signals | Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance; Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance |
| AC input voltage / frequency / current | 100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.) |
| Connector type | 15-pin D-subminiature, blue connector; DVI-D, white connector |
| Dimensions with stand | 14.42 x 17.59 x 5.81 inches (366.21 x 446.72 x 147.65 mm) |
| Weight with stand assembly and cables | 12.79 lbs (5.8 kg) |
| Operating temperature | 5° to 35°C (41° to 95°F) |
| Operating humidity | 10% to 80% noncondensing |
| Power consumption, normal operation | 75 W maximum, 32 W typical |
| Power consumption, switch off | Less than 1 W |
| VESA mounting holes | 100 mm |
The optimal preset resolution is 1440 x 900 at 60 Hz.
It supports analog RGB through a 15-pin D-subminiature connector and digital DVI-D.
Normal operation uses 75 W maximum and 32 W typical.
Slightly dampen a soft, clean cloth with water and use a screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.