The Dell E2222H monitor is a 21.45-inch monitor with a resolution of 1920 x 1080 and a wide viewing angle of 178 degrees. It also features DisplayPort digital connectivity and ComfortView, which reduces the risk of eye strain caused by blue light emission.
The Dell E2222H is a 21.45-inch FHD TFT LCD monitor with a VA panel and LED backlight. It offers 1920 x 1080 resolution, 178-degree viewing angles, a 3,000:1 contrast ratio, and DisplayPort and VGA connectivity.
The guide explains package contents, product features, front and rear controls, pin assignments, setup, cable management, OSD operation, resolution settings, tilt adjustment, self-test, built-in diagnostics, troubleshooting, and appendix information. This manual is written in Chinese.
| Regulatory model | E2222Ht/E2222Hf |
|---|---|
| Screen type | FHD TFT LCD |
| Panel type | Vertical Alignment (VA) |
| Visible area (diagonal) | 544.83 mm (21.45 in.) |
| Active area | 1245.86 cm2 (193.11 in.2) |
| Pixel pitch | 0.249 mm x 0.241 mm |
| Pixels per inch | 103 |
| Viewing angle | 178 degrees horizontal and vertical (typical) |
| Brightness | 250 cd/m2 (typical) |
| Contrast ratio | 3,000:1 (typical) |
| Panel coating | Anti-glare with 3H hardness |
| Backlight | LED side-lit system |
| Response time | Normal <10 ms; Fast <5 ms |
| Color depth | 16.7 million colors |
| Color gamut | 72% (CIE1931), 83% (CIE1976) |
| Dell Display Manager compatibility | Yes |
| Connectivity | 1 x DP 1.2, 1 x VGA |
| Border width | 12.8 mm (top), 12.8 mm (left/right), 16.9 mm (bottom) |
| Tilt angle | -5 degrees to 21 degrees |
| Standby power | <=0.3 W |
| Resolution | 1920 x 1080 |
The package includes the monitor, stand, base, VESA screw cover, power cable (varies by country), VGA cable (Europe, Middle East, Africa, and Japan), DP cable, quick start guide, and safety, environmental, and regulatory information.
A blinking white light indicates the monitor is in standby mode.
Press and hold the exit button (button 4) for four seconds.
Check the signal source, move the mouse or press a keyboard key, verify the video cable connection, and reset the computer or video player if needed.