The Dell C7017T is a 27-inch curved monitor with a 1920x1080 resolution and a 144Hz refresh rate. It also features AMD FreeSync technology to eliminate tearing and stuttering in games.
The Dell C7017T is a flat-panel display with an active matrix TFT LCD and LED backlight, a 176.563 cm (69.513 inch) diagonal viewable image, and 1920 x 1080 resolution. This user guide covers its features, remote control, parts and controls, specifications, setup, operation, and troubleshooting.
Topics include connecting the monitor, wall mounting, front-panel and OSD controls, touch OSD control, maximum resolution settings, Dell web management, self-test and built-in diagnostics, and common, USB, MHL, touch, and Ethernet problems.
| Diagonal viewable image size | 176.563 cm (69.513 inches) |
|---|---|
| Resolution | 1920 x 1080 |
| VESA mounting holes | 400 mm |
| Touch panel type | Infrared Touch Panel |
| Touch input method | Finger, Passive Stylus |
| Maximum multi-touch points | 10 points |
| Touch accuracy | ≤ 2 mm (Over 90% of screen) |
| Touch response time | ≤ 15 ms |
| Glass surface | Anti-Glare, Anti-Smudge, Hardness (5H) |
| Glass thickness | 4 mm |
| Horizontal scan range | 30 kHz to 83 kHz (automatic) |
| Vertical scan range | 23 Hz to 120 Hz (automatic) |
| Maximum preset resolution | 1920 x 1080 at 60 Hz |
| AC input voltage/frequency/current | 100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 4.0 A (Max) |
| Inrush current | 120 V: 40 A (Max.); 240 V: 80 A (Max.) |
| Normal operation power consumption | 230 W (Maximum); 145 W (Typical) |
| Active-off mode power consumption | Less than 0.5 W |
| Switch off power consumption | Less than 0.3 W |
| Network standby power consumption | Less than 3 W |
| Energy Star power consumption (PON) | 120 W |
| Remote control batteries | Two 1.5V AAA batteries |
| ENERGY STAR | Certified |
| Operating systems supported | Windows XP, Vista, 7, 8, 8.1, 10 |
Press and slide the cover to open it, align the batteries according to the (+) and (–) indications, then replace the cover.
Check that the monitor is turned on and reconnect the upstream cable to the computer.
Ensure the MHL cable and MHL device are MHL certified.
Ensure the USB cable connecting the PC and the monitor is properly secured.