Dell UltraSharp 25 USB-C Monitor - U2520D/U2520DR User's Guide
The Dell U2520D/U2520DR UltraSharp 25 USB-C monitor is a 25-inch (634.4 mm diagonal) active-matrix TFT LCD with 2560 x 1440 resolution, 99% sRGB color gamut, and Display HDR 400. It supports DisplayPort, HDMI, and USB Type-C, including USB Type-C power delivery up to 90 W, and has tilt, swivel, height, and rotation adjustments.
This user guide describes package contents, parts and controls, monitor specifications, setup and cable connections, front-panel and OSD operation, troubleshooting, and appendix information.
| Viewable image diagonal | 634.4 mm (25 in.) |
|---|---|
| Aspect ratio | 16:9 |
| Maximum preset resolution | 2560 x 1440 at 60 Hz |
| Pixel pitch | 0.216 mm x 0.216 mm |
| Pixel density | 117.5 PPI |
| Viewing angle (vertical) | 178° typical |
| Viewing angle (horizontal) | 178° typical |
| Luminance output | 350 cd/m² (typical) |
| Contrast ratio | 1000 to 1 (typical) |
| Response time (Normal) | 8 ms |
| Response time (Fast) | 5 ms |
| Color depth | 16.78 million colors |
| Color gamut | 99% sRGB, 99% REC709, 95% DCI-P3 |
| Calibration accuracy | Delta E < 2 (average) |
| Faceplate coating | Anti-Glare with 3H hardness |
| Backlight | White LED edgelight system |
| Panel technology | In-Plane Switching Technology |
| Screen type | Active matrix - TFT LCD |
| Horizontal scan range | 10 kHz to 120 kHz (automatic) |
| Vertical scan range | 48 Hz to 75 Hz (automatic) |
| AC input voltage | 100 VAC to 240 VAC |
| AC input frequency | 50 Hz or 60 Hz ± 3 Hz |
| AC input current | 2.5 A (typical) |
| Standby power | 0.3 W |
| VESA mounting | 100 mm x 100 mm |
| USB Type-C ports | 2 |
| USB 3.0 downstream ports | 3 (including 1 with power charging) |
| Supported video modes | 480p, 480i, 576p, 576i, 720p, 1080i, 1080p, QHD |
| MST external monitors | Up to 3 |
| Display HDR | Display HDR 400 |
Contact Dell technical support.
Press and hold the Menu/function button next to the Power button for 4 seconds.
Check whether the signal cable is plugged in properly and re-plug it if necessary.
Check that the connected device is compliant with the USB-C specification.