Dell OptiPlex 390 Small Form Factor Owner's Manual
This manual is for the Dell OptiPlex 390 small form factor desktop computer. It describes safety precautions and preparation before working inside the computer, then gives removal and installation procedures for the cover, front bezel, expansion card retainer, optical drive, hard drive, memory, chassis intrusion switch, speaker, heat sink and processor, coin-cell battery, power button cable, system fan, I/O panel, power supply, system board, drive cage, and fan shroud.
It also covers the system setup program, troubleshooting with diagnostic LEDs, beep codes and error messages, specifications for the small form factor configuration, and how to contact Dell. This manual is written in Spanish.
| Power supply | 240 W |
|---|---|
| Maximum heat dissipation | 1259 BTU/hr |
| AC input voltage | 100-240 VAC |
| AC input frequency | 50-60 Hz |
| AC input current | 3.6 A |
| Coin-cell battery | CR2032 3 V lithium |
| Height | 29 cm (11.42 in) |
| Width | 9.26 cm (3.65 in) |
| Depth | 31.2 cm (12.28 in) |
| Weight | 5.7 kg (12.57 lb) |
| Operating temperature | 10 to 35 C (50 to 95 F) |
| Storage temperature | -40 to 65 C (-40 to 149 F) |
| Operating humidity | 20% to 80% (non-condensing) |
| Storage humidity | 5% to 95% (non-condensing) |
| Operating vibration | 0.26 GRMS |
| Storage vibration | 2.2 GRMS |
| Operating shock | 40 G |
| Storage shock | 105 G |
The small form factor model uses a 240 W power supply.
It uses a 3 V lithium CR2032 coin-cell battery.
The operating temperature range is 10 to 35 degrees C.
Chapter 19 describes the system setup program and its options.