The document describes the features and characteristics of the PCA12.0 premium and HCA12.0 high spray gun atomizers.
This manual covers the Anest Iwata PCA12.0 Premium and HCA12.0 High spray gun atomizers, including their intended solvents, filling, cleaning, maintenance, replacement parts, warranty, and troubleshooting. The HCA 12.0 model is for standard solvents, while the PCA 12.0 model is for acetone and strong solvents.
It also provides safety instructions, such as wearing protective equipment, avoiding spraying against the wind, and not filling caustic, corrosive, or inflammable substances into the sprayer. After use, the sprayer should be emptied and cleaned without hot water above 30°C.
| Nozzle diameter | 0.8 mm |
|---|---|
| HCA 12.0 seal | FPM (green) |
| PCA 12.0 seal | BMS 210 (black) |
| Suitable solvents (HCA 12.0) | Standard solvents |
| Suitable solvents (PCA 12.0) | Acetone, strong solvents etc. |
| Tank capacity | 1 Litre |
| Maximum cleaning water temperature | 30°C |
| Warranty period | 12 months from date of sale |
No caustic, corrosive (acid), or inflammable substances may be filled into the sprayer.
No; the sprayer should be emptied after each use and spraying agent should never be left in it.
The tank capacity is 1 litre.
Tighten pressure valve (8) with a screwdriver, free a jammed valve ball (6), clean a clogged intake strainer, clean and oil the pump tube, or replace a defective sleeve.