This is a 3000 lumens diving flashlight with the following features:
This is the bilingual user manual for the Ring Light 3000, a ring-shaped dive light with an M67 mount. It covers the parts supplied (main body, tail cap, left and right buttons, spare O-rings, remover, battery and charging dock), safety warnings, and full operating instructions for the dual-button control.
The manual explains turning the light on and off, standby, switching between white, red and blue light, brightness adjustment in each color, strobe and flashing signal modes, sleep mode, the battery level and mode indicator colors, and the automatic brightness reduction when the light gets too hot. It closes with a specifications table listing lumens, depth rating, beam angle, color temperature, battery, charge time and dimensions.
| Brightness (continuous light) | Max 1800 lumens |
|---|---|
| Brightness (strobe light) | Max 3000 lumens |
| Depth Rating | 100 m / 330 ft |
| Beam Angle | 100 degrees on land / 90 degrees underwater |
| Color Temperature | 5000 ~ 5500K |
| Power Level | 100% / 75% / 50% / 25% |
| Usage Time | Approx. 45 minutes continuous light / approx. 12 hours strobe light |
| Battery | 1 * 26650 Lithium Battery |
| Charge Time | Approx. 4 hours from zero (5V/2A) |
| Dimensions | 123.8 * 159.6 * 40.6 mm, fits M67 mount |
| Button | Dual push button with battery level meter |
Press the right and left buttons at the same time and hold them down for one second to turn it on; hold both buttons down for two seconds to turn it off.
The light automatically reduces the brightness to 20% to reduce heat and protect the components.
It has a depth rating of 100 m / 330 ft.
About 45 minutes in continuous light mode and about 12 hours in strobe light mode.