This product is a network camera with two cameras and a wide-angle lens that can be installed in different locations to cover an entire room.
This is the Quick Installation Guide for the VIVOTEK VC8201 Dual-head Network Camera, a split camera system with a recess mount, fisheye lens and WDR. The guide explains how the two sensor modules can be installed in the same or in different rooms or mounting positions, with a fisheye lens module for covering a whole room and a fixed-focal lens module for a specific field of view.
The document walks through the hardware installation: drilling the ceiling or wall, fitting the fixing tube or using M3 self-tapping screws, pulling the retaining clips and inserting the module, routing the RJ12 sensor cables, and mounting the camera's main module with the bracket as a drilling template. It then covers connecting 12V DC power and Ethernet or PoE, installing an SD/SDHC/SDXC card, connecting DI and DO devices, adjusting the fixed lens angle, and assigning an IP address with Installation Wizard 2. Safety notices and package contents are given in several languages.
| Power input | 12V DC or PoE (up to 11.5W) |
|---|---|
| Maximum DO pin load | 50 mA |
| Sensor cable length | Up to 8 meters |
| Supported memory cards | SD/SDHC/SDXC |
| Extension tube use | For walls thicker than 6 cm |
Yes. Besides 12V DC, the camera can be powered through a PoE connection up to 11.5W.
The RJ12 sensor cables can run up to 8 meters.
The maximum load on a DO pin is 50 mA.
Install Installation Wizard 2; it searches for VIVOTEK video receivers, video servers and network cameras on the same LAN, and you double-click the camera's MAC address to open a browser management session.