The MILLITEMP™ CDFR-003 is a programmable thermostat that can control electric floor heating cables in the temperature range of 5-40°C (standard). It has two modes: constant temperature mode and event mode.
The Nexans MILLITEMP CDFR-003 is a programmable thermostat for controlling electric floor heating cables in the 5–40 °C range. It automatically regulates room or floor temperature and can run in constant-temperature mode or event mode. It has a built-in room sensor and is supplied with an external floor sensor; a combined mode can use both sensors, with the floor sensor limiting floor temperature.
The document is a Swedish user manual and installation instruction. It covers the product description, technical data, display symbols, first start-up, operating modes, viewing measured sensor values, changing settings, error messages, resetting, and installation. Installation instructions include terminal connections for the heating cable, supply, and floor sensor. This manual is written in Swedish.
| Rated voltage | 230 V~ |
|---|---|
| Power consumption | Less than 2 W |
| Maximum load | 16 A, about 3600 W at rated voltage |
| Temperature range | +5 °C to +40 °C (standard) |
| Dimensions | 84 x 84 x 40 mm (25 mm recess) |
| Protection class | IP 21 |
| Floor sensor cable length | 3 m |
| Connection cable cross-section | 0.5 mm² to 2.5 mm² |
| Maximum number of heating cables | 3 |
| Sensor element | NTC |
| Display | LCD with blue backlight |
It controls electric floor heating cables in the 5–40 °C range and automatically regulates room or floor temperature.
It is 16 A, approximately 3600 W at rated voltage.
If used, the floor sensor is connected to terminals 1 and 2.
Yes, the thermostat remembers settings after a power failure, with EEPROM backup and no time limit.