This guide provides important safety information about the Illumina® iSeq™ 100 Sequencing System, including installation, maintenance, and operation. The guide also includes product compliance and regulatory statements.
This guide provides important safety information for installing, servicing, and operating the Illumina iSeq 100 sequencing system. It covers general and electrical safety warnings, power specifications, protective grounding, fuses, high-temperature surface warnings, and environmental requirements.
It also presents compliance and regulatory statements, including product certification, RF human exposure limits, Taiwan compliance, and EMC notices. The document states that the system is for research use only and not for diagnostic procedures. This manual is written in Chinese.
| Line voltage | 100 to 240 V, 50 or 60 Hz AC |
|---|---|
| Peak power consumption | 80 W |
| Fuse rating | 5 mm × 20 mm, 10 A, 250 VAC, slow-blow |
| Operating temperature | 15°C to 30°C (22.5°C ±7.5°C); ambient variation no greater than ±2°C during operation |
| Relative humidity | 20% to 80%, non-condensing |
| Altitude | Below 2000 m (6500 ft) |
| Air quality | ISO 9 (general indoor air) or higher |
| RFID exposure distance | At least 20 cm (8 in) between the radiator and the human body |
The system requires 100 to 240 V AC at 50 or 60 Hz.
The peak power consumption is 80 W.
Maintain 15°C to 30°C (22.5°C ±7.5°C), and do not let ambient variation exceed ±2°C during operation.
At least 20 cm (8 inches).