This manual describes how to install and configure the IP8172/72P fixed network camera.
This guide explains how to mount and connect the VIVOTEK IP8172/72P fixed network camera, including lens installation, general and PoE network connections, and IP address assignment using Installation Wizard 2.
It also covers ready-to-use adjustments such as zoom and focus, fine-tuning the CS-mount adapter ring, and lens dimension requirements for compatible lenses.
| Video | Full HD |
|---|---|
| Focus assist | Focus Assist |
| Power | PoE-compliant |
| Lens mount | CS-mount |
| Flange back length | Longer than 12.5 mm |
| Screw mount length | Shorter than 5.2 mm |
| Lens edge to front panel distance | Longer than 0.5 mm |
Install Installation Wizard 2 from the Software Utility directory on the software CD, then double-click the MAC address matching the camera label to open a browser management session.
No. Do not install a P-Iris lens to the IP8172, and do not install a DC-Iris lens to the IP8172P, because the voltages supplied to the modules are different.
Fine-tune the CS-mount adapter ring using the supplied L-type hex key wrench and a removal tool, then tighten the lens retention screw.
The flange back length must be longer than 12.5 mm, the screw mount must be shorter than 5.2 mm, and the distance between the lens edge and front panel must be longer than 0.5 mm.