This file introduces the installation instructions of AM-21N tilt bracket, including installation dimensions, installation methods, compatible cameras and more.
This guide covers the VIVOTEK AM-21N tilt bracket, a mounting accessory for VIVOTEK cameras such as the MS9390-HV. It describes wall mounting, pole mounting with the AM-312, corner mounting with the AM-412, and mounting to an electrical junction box, along with mounting dimensions and package contents.
The guide explains cable routing through a user-supplied 3/4" conduit, installation of the waterproof cable gland on the Ethernet cable, connection of a grounding wire to the camera's ground screw, and the torque values for the mounting screws. It also lists the electrical boxes the tilt bracket supports.
| Conduit size | 3/4 inch |
|---|---|
| Camera mounting torque | 6.5±0.5 kgf-cm |
| Pole mount torque | 35 lb-in (40 kg-cm) |
| Grounding wire | 1.5 m stainless steel, M3×5, green/yellow, ≥20 AWG |
| Mounting screws | M4 × 25 mm |
| Camera attachment screws | 4 × T10 |
| Accessory ordering part number | 100228700G |
The guide lists the MS9390-HV as a compatible camera.
A 3/4" conduit is required for routing the cables with a waterproof connection; the conduit is user-supplied.
It supports wall mount, pole mount via the AM-312, corner mount via the AM-412, and mounting to an electrical junction box.
It supports the Cantex 3/4" type FSE 2 Gang outdoor/indoor box, a generic 3/4" conduit box enclosure, and a single rectangular handy box.