Ranger™ Count 2000 Series Instruction Manual
This is the instruction manual for the Ohaus Ranger Count 2000 Series counting scale. It contains installation, operation and maintenance instructions and states that the manual should be read completely before the scale is used. Safety precautions cover AC voltage matching, leveling, power cord routing, ambient conditions and battery handling.
The manual explains how to install the pan, select a location, level the scale with its level indicator, and connect AC power or use the internal rechargeable battery. Operation sections describe the control panel buttons and LCD symbols, counting with APW establishment, accumulation and statistics, check weighing with the colored LEDs, and closing technical data and specifications for the RC21P1502, RC21P3, RC21P6, RC21P15 and RC21P30 models.
| Operating temperature | -10 °C to 40 °C |
|---|---|
| Relative humidity | 20% to 85%, non-condensing |
| Power | AC 200-240 V, 50/60 Hz, with internal rechargeable sealed lead acid battery |
| Maximum displayed resolution | 1:30000 |
| Weighing units | g, kg, lb, oz, lb:oz |
| Tare range | To capacity by subtraction |
| Stabilization time | ≤ 1 second |
| Weight display | 3 LCD with white LED backlight, 6-digit 7-segment, 20.5 mm / 0.8 in characters |
| Keyboard | 20 mechanical buttons |
| Battery operating time (at 20 °C) | 210 hours with backlight turned off |
| Construction | ABS plastic housing with 304 stainless steel platform |
| Pan dimensions | 225 x 300 mm |
| Net weight | 3.9 kg / 8.6 lb |
| Gross weight | 5.15 kg / 11.4 lb |
| RC21P30 capacity x readability | 30 kg x 0.001 kg / 30000 g x 1 g |
| RC21P1502 capacity x readability | 1.5 kg x 0.00005 kg / 1500 g x 0.05 g |
Read the manual completely before using the scale.
Allow the battery to charge for 12 hours before using the scale on battery power.
Adjust the feet so the bubble is centered in the circle of the level indicator.
Green means the load is at or above the lower limit and at or below the upper limit; red and yellow indicate over and under loads.