AMI CACE User Manual, introduces product safety, use, installation and other contents
This Operator's Manual (document ID A-96.250.871, first edition Oct. 2016) from SWAN ANALYTISCHE INSTRUMENTE AG describes the main steps for instrument setup, operation and maintenance of the AMI CACE, version 6.20 and higher. It includes safety instructions, product description, installation, instrument setup, operation, maintenance, troubleshooting and a program overview.
The AMI CACE is a complete monitoring system for automatic, continuous measurement of specific (total) conductivity before a cation exchanger and cation (acid) conductivity after a cation exchanger (CACE) in power plant water. Based on difference conductivity measurement, the pH of the sample and the concentration of an alkaline substance (ammonia, morpholine or ethanolamines) can be calculated. The manual is intended for qualified operators and states that only SWAN trained and authorized personnel shall perform the tasks described.
| Signal outputs | Two programmable current loop outputs 0/4–20 mA, third output optional |
|---|---|
| Maximum signal output burden | 510 Ω |
| Relay contacts | Two potential-free contacts, maximum load 1 A/250 VAC |
| pH calculation standard | According to VGB 450L, edition 2006 |
| Temperature compensation curves | Strong acids, strong bases, ammonia, morpholine, ethanolamines, neutral salts, UPW, coefficient |
It is designed for determination of specific (total) conductivity and cation (acid) conductivity after the cation exchanger (CACE) in power plant water, and calculates pH and the concentration of the alkaline substance if present.
Only one alkalization agent in the sample, contamination mostly NaCl, phosphate concentration below 0.5 ppm, and pH value above 7.5 and below 11.5.
Only official SWAN spare parts and disposables; using other parts during the normal warranty period voids the manufacturer's warranty.
Only SWAN trained and authorized personnel shall perform the tasks described in the manual, and modifications may only be carried out by an authorized Service Technician.