This manual will guide you through the disassembly, assembly and preparation of your Kawasaki KX250.
This manual from Kawasaki explains dealer procedures for uncrating, assembling and preparing the KX250 motorcycle before sale. It covers opening the crate, checking the parts box against the illustrated lists for the KX250-R1 and KX250R6F/R7F models, and installing items such as the handlebar, throttle grip, front brake master cylinder, clutch lever, engine stop switch, front wheel, front number plate, fuel tank vent hose and side stand.
Preparation sections cover the air cleaner, front and rear brake fluid, clutch lever and cable, drive chain, front fork, rear shock absorber, tire air pressures, fuel, coolant and transmission oil, plus throttle grip and cable checks and a fastener check with torque tables. The manual ends with a test ride checklist and an A&P Check List. Models covered are the 2005 KX250-R1, 2006 KX250R6F and 2007 KX250R7F.
| Handlebar clamp bolt tightening torque | 25 N·m (2.5 kgf·m, 18 ft·lb) |
|---|---|
| Front axle nut torque | 79 N·m (8.0 kgf·m, 58 ft·lb) |
| Rear shock absorber mounting nut (upper) torque | 39 N·m (4.0 kgf·m, 29 ft·lb) |
| Steering stem head nut torque (KX250-R1) | 79 N·m (8.0 kgf·m, 58 ft·lb) |
| Steering stem head nut torque (KX250R6F/R7F) | 98 N·m (10.0 kgf·m, 72 ft·lb) |
| Models covered | 2005 KX250-R1, 2006 KX250R6F, 2007 KX250R7F |
It covers the 2005 KX250-R1, 2006 KX250R6F and 2007 KX250R7F.
25 N·m (2.5 kgf·m, 18 ft·lb).
Uncrating, assembly and preparation steps for the KX250, followed by a fastener and torque check, a test ride and an A&P Check List.
The checklist covers throttle cable operation, steering lock-to-lock, front and rear suspension, engine starting and response, transmission and clutch, brakes, the engine stop switch, unusual noises and fluid leaks.