South Star underwater robot manual, introduces the use of products, installation, maintenance and other content
This is the Chinese user manual for the South Star (南极星) underwater robot, published by Shenzhen South Star Yacht Studio. It lists the parts supplied — LCD monitor, hand-held cable reel, underwater grabber, underwater cable, battery, battery pack, charger, carrying case and manual — and explains first use: connecting the battery to the cable reel to power on, charging the battery with the red lead to positive and the black lead to negative from an AC 220 V outlet for 6–8 hours until the charging indicator goes out, and using the power, grabber and lighting switches.
The performance section gives an IP68 rating to 100 m, a grab weight of 80 kg and a total weight of 10 kg, a 7-inch LCD color screen, and 1/3" SONY CCD 520tvl or 1/4" Sharp CCD 420tvl camera options. Batteries are 12 V 4.5 Ah or 24 V 4.4 Ah for 8 hours of monitoring, recommended temperature is 0 °C to 45 °C, diving depth 25–100 m and winch load no more than 200 kg. Troubleshooting covers a blank display and cable snagging underwater, and the last page gives the contact address, phone, e-mail and website of the Asian Yacht Consultant (Hong Kong) Co., Ltd office in Shenzhen. This manual is written in Chinese.
| Diving rating | IP68, 100 m water depth |
|---|---|
| Grab weight | 80 kg |
| Total weight | 10 kg |
| Camera option 1 | 1/3" SONY CCD, 520 TVL |
| Camera option 2 | 1/4" Sharp CCD, 420 TVL |
| Display | 7-inch LCD color screen |
| Battery 1 | 12 V 4.5 Ah, 8 hours of monitoring use |
| Battery 2 | 24 V 4.4 Ah, 8 hours of monitoring use |
| Charging time | 6–8 hours from AC 220 V |
| Recommended temperature | 0 °C to 45 °C |
| Diving depth | 25–100 m |
| Winch load | No more than 200 kg |
Both the 12 V 4.5 Ah and the 24 V 4.4 Ah battery are stated to give 8 hours of monitoring use.
Connect the charger's red lead to the battery positive terminal and the black lead to negative, plug into AC 220 V, and charge for 6–8 hours until the charging indicator goes out.
The troubleshooting section says to check whether the battery is low and whether the connectors are intact.
No. The manual says not to use it while the boat is running at high speed; stop the boat and then begin catching.