Installation and operation manual for dishwashers.
This document gives installation and operation instructions for HOBART FX/GX Series glass and dishwashers from serial no. 8652 0001 onwards. It covers location, electrical connection, water connection, drain connection, controls, start-up, operation, switch-off and cleaning.
The manual also describes temperature display, fault codes, settings and counter values, frost prevention, maintenance and troubleshooting. It states a machine noise level of 63 dB (A) and connecting voltages of 400 V / 50 Hz / 3 Ph / N / PE or 230 V / 50 Hz / 1 Ph / N / PE.
| Noise level | 63 dB (A) |
|---|---|
| Connecting voltage, 3-phase | 400 V / 50 Hz / 3 Ph / N / PE |
| Connecting voltage, 1-phase | 230 V / 50 Hz / 1 Ph / N / PE |
| Line flow pressure | 0.5 – 10 bar |
| Maximum drain connection height | 0.75 m |
| Maximum dosing pump head height | 1.5 m |
| Water connection temperature | max. 60°C |
P 01 is the short cycle for light or medium soiled dishes and glassware, P 02 is the standard cycle for medium or heavy soiled dishes, and P 03 is the long cycle for dried-on soiling and containers.
The connection between the machine and the site drain must not exceed a height of 0.75 m.
Clean the drain hose and restart the drain cycle.
The machine noise level is 63 dB (A).