SMC-EZ1026CGT is a 10/100Mbps non-managed fast Ethernet switch that supports Gigabit fiber uplink. Each port supports half/full duplex adaptation, transmission rate adaptation; MDI/MDI-X auto-flip port, whether it is a straight line or a crossover line can be connected to a server, workstation, HUB or other switch; supports IEEE802.3 and IEEE802.3u, and can be compatible with hubs, switches and network cards produced by other manufacturers that comply with this protocol; the storage forwarding switching mechanism ensures error-free transmission; half/full duplex flow control ensures that no packets are lost under heavy load conditions; the LED indicator on the front panel allows you to clearly understand the port and system status monitoring; 19” steel shell design, can be mounted on the rack.
The SMC EZ1026CGT is a 24‑port 10/100 Mbps unmanaged Ethernet switch designed for small‑to‑medium networks. It features auto‑MDI/MDI‑X ports, two Combo G uplink ports with optional SFP modules, and a 19‑inch rack‑mountable steel chassis.
This manual covers basic product information, hardware description, installation procedures, detailed product specifications, and a troubleshooting guide with LED indicator meanings and common fault resolutions. This manual is written in Chinese.
| RJ‑45 ports | 24 |
|---|---|
| Combo G uplink ports | 2 |
| Dimensions | 440 × 172 × 43 mm |
| Weight | 1.79 kg |
| Input voltage | 100‑240 V |
| Maximum current | 0.5 A @110 V / 0.22 A @240 V |
| Power consumption | 13 W max |
| Operating temperature | 0‑50 °C |
| Storage temperature | -40‑70 °C |
| Operating humidity | 10%‑90% non‑condensing |
| Media support | 10BASE‑T (100 Ω, Cat3‑5), 100BASE‑TX (100 Ω, Cat5) |
It provides 24 RJ‑45 10/100 Mbps ports.
Check the power cable and plug for damage, ensure the connection is secure, try a different power source, or contact the local SMC dealer.
A steady green LED shows a valid link, a flashing green LED indicates data transmission or reception, and no light means no link.
Install the switch in an environment with a temperature of 0‑50 °C, humidity of 10%‑90% non‑condensing, and provide at least 5 cm clearance for cooling.