This manual provides basic operation and troubleshooting information for the Anybus® Modbus-TCP/RTU Gateway.
This document provides step-by-step instructions for installing and configuring the HMSI-168-77 Anybus® Modbus-TCP/RTU Gateway. It includes mounting on DIN rail, IP configuration, serial and Ethernet connections, LED indicators, and technical specifications. The gateway acts as a Modbus TCP server, transparently converting between Modbus TCP and Modbus RTU protocols.
The manual also covers safety and liability disclaimers, intellectual property rights, and regulatory compliance, including CE and CULUS certifications. It is intended for users responsible for verifying that the device meets performance and safety requirements in their specific applications.
| Model Name | Anybus Modbus-TCP/RTU Gateway |
|---|---|
| Order Code | AB7702 |
| Ethernet | 10/100Mbit/s |
| Serial Interfaces | EIA-232 with full modem control, EIA-485 |
| Protocols | Modbus RTU, ASCII, TCP |
| Baudrates | 300–115200bps |
| Mounting | DIN rail (EN50022) |
| Housing | Grey plastic (LEXAN940) self-extinguishing according to UL94–V0 |
| Dimensions | 90x70x58mm |
| Operating Temperature | -40 to +65°C |
| Storage Temperature | -40 to +85°C |
| Humidity Range | 5–95%RH, non-condensing |
| Housing Class | IP20 |
| Power Supply | 9–24VDC or AC, SELV |
| Power Consumption | 2.0W |
| Certifications | CE, CULUS |
The default IP address is 10.200.1.n, where n corresponds to the last number in the MAC ID.
It is mounted on DIN rail by hooking it onto the upper lip and pressing it until it snaps into place.
It supports Modbus RTU, ASCII, and TCP protocols.
The operating temperature range is -40 to +65°C.