This is a water treatment equipment maintenance manual
This service manual provides detailed instructions for installing and operating the Pentair FLECK® 5800 LXT water softener, including system configuration, control programming, and troubleshooting. It includes tables for tank sizing, resin volume, injector and BLFC sizes, and step-by-step installation and startup procedures. Safety and installation guidelines are also provided, including electrical and plumbing requirements, temperature limits, and warnings for outdoor use. The manual covers control features such as time-of-day programming, regeneration queuing, and flow indicators.
| Water Pressure Requirement | Minimum 20 psi (1.4 bar) |
|---|---|
| Electrical Supply | 120 VAC to 12 VDC via transformer |
| Maximum Water Pressure | 125 psi (8.6 bar) |
| Operating Temperature Range | 32°F to 125°F (0°C to 52°C) |
| Drain Line Size | Minimum 1/2" (13 mm) for residential, 3/4" (19 mm) for backwash >7 gpm or drain >20' |
A minimum of 20 psi (1.4 bar) of water pressure is required for the regeneration valve to operate effectively.
An uninterrupted 120 VAC supply is required, which is converted to 12 VDC via a transformer.
Water pressure must not exceed 125 psi (8.6 bar).
The unit must be installed where temperatures are between 32°F (0°C) and 125°F (52°C).