This file is about the instruction manual of the multimeter, which can measure voltage, current, resistance, diodes, etc. The measurement range is 250V/500V/1000V, and it can meet the needs of insulation resistance check for electricity, cables, electrical and mechanical equipment, telecommunication equipment and electrical facilities.
The document provides an instruction manual for the 601E-60BX-000A digital insulation tester. It details the instrument's features, including a high-stability DC voltage converter and digital bridge measurement capabilities. The manual outlines the front panel controls, such as voltage selection switches and resistance range selectors, and explains how to connect terminals for various measurements.
| Auto power off | approx. 15 minutes after turning on |
|---|---|
| Power consumption | less than 300mw at unload measurement |
| Operation environment temperature | 0°C —40°C |
| Measured voltage | 250V±10%, 500V±10%, 1000V±10% |
| Resistance range | 0.1MΩ—20MΩ, 0.1MΩ—50MΩ, 0.1MΩ—100MΩ, 20MΩ—500MΩ, 50MΩ—1000MΩ, 100MΩ—2000MΩ |
| Accuracy | ±(4% of reading ± 2 digits) |
| Shot current | 1.8mA |
| Median resistance | 2 MΩ |
| ACV Accuracy | ±(1.0% of reading + 6 digits) |
| Input impedance | 1MΩ |
| Frequency response | 50～200 Hz |
| Dimension | 175(L) ×110(W) ×70(D) mm |
| Weight | 630 g (including batteries) |
The instrument turns off automatically approximately 15 minutes after being turned on.
The accuracy is ±(4% of reading ± 2 digits).
The '1' indicates an over-range condition, and the user should turn to a higher range to get a reading.