This document is an instruction manual for a multi-functional drilling and tapping machine dedicated inverter program. It describes the technical specifications, wiring diagram and parameter settings of the machine, as well as the action description. The machine uses a single motor and can achieve both drilling and tapping functions. It features low-speed and high-speed switching, tapping and drilling switching, forced reversing, upper and lower limit triggering, etc.
The document provides technical specifications for the Q09 Series inverter, noting it utilizes a single 4-pole 0.75KW motor to handle both drilling and tapping functions. Key performance metrics include the ability to drill a 27.7MM hole and tap a 16MM thread at a low speed of 80RPM. This manual is written in Chinese.
| Motor Type | Single 4-pole 0.75KW motor |
|---|---|
| Drilling Capacity | 27.7MM at 80RPM |
| Tapping Capacity | 16MM at 80RPM |
| Low Speed Range | 5.0Hz~49.2Hz |
| High Speed Range | 48.0Hz~100.0Hz |
It is controlled by switch K3. When K3 is closed, the machine performs tapping; when open, it performs drilling.
It is used during tapping to reverse the motor if the thread gets stuck, preventing the drill bit from breaking.