GLVAC GL1551C Thyristor Parameter Description

This document describes the parameters of the GL1551C thyristor, including anode parameters, gate parameters, heating voltage and current, mechanical parameters, and typical performance.


GLVAC GL1551C Thyristor Parameter Description - cover page
Brand
GLVAC
Category
Other Electronics
Document type
Datasheet
Language
Chinese
Pages
2
File format
PDF
File size
506 KB
Published
13 December, 2022
Updated
28 September, 2023
MD5 checksum
FCCCAA6DA06C9358C500738604DF46DD

About this manual

This document serves as a technical parameter description for the GLVAC GL1551C thyristor. It lists critical electrical ratings such as peak anode voltage and current, along with gate control requirements and heating specifications necessary for operation.

The datasheet also covers mechanical installation details, including flange mounting and cooling methods (air, oil, or liquid immersion). It concludes with typical performance characteristics like critical turn-on voltage and delay time, accompanied by specific notes on measurement references and installation precautions. This manual is written in Chinese.

What's inside

  • Anode Parameters
  • Gate Parameters
  • Heating Voltage and Current
  • Mechanical Parameters
  • Typical Performance

Specifications

Peak Anode Forward Voltage35kV (max)
Peak Anode Reverse Voltage25kV (max)
Peak Anode Current1000A
Peak Anode Current (Max Repetitive)2000A
Average Anode Current1.25A (2.2A max)
Anode Current Rise Rate5kA/μs
Pulse Power17.5MW
Cathode Heating Voltage6.3 +0.3 0 Vac
Cathode Heating Current18A~19.5A
Preheat Time10min (min)
Installation MethodFlange Mounting
Cooling MethodAir or Oil/Liquid Immersion
Critical Turn-On Anode Voltage2kV (max)
Anode Ignition Delay Time500ns (max)

Frequently asked questions

What is the maximum peak anode forward voltage?

The maximum peak anode forward voltage is 35kV.

What is the required cathode heating voltage?

The cathode heating voltage should be 6.3 Vac with a tolerance of +0.3 to 0.

How long is the minimum preheat time required?

The minimum preheat time required is 10 minutes.

What is the installation method for this thyristor?

The thyristor must be installed using flange mounting.

Download PDF (506 KB)

More GLVAC Manuals


View all GLVAC manuals →