The document introduces the features and characteristics of GLVAC's DC contactor products. The DC contactor adopts special EPIC® ceramic sealing technology, which has the characteristics of high temperature operation, complete sealing, and high efficiency DC dual coil. At the same time, the product has protection level IP67, meets the external flame retardant standards for marine electrical equipment, and has the ability to prevent ignition of surrounding flammable gases.
The GLVAC GX66 is a DC contactor rated for 600+ Amps operating between 12V and 800V DC. It features proprietary EPIC® ceramic sealing technology, allowing it to withstand operating temperatures up to 175°C and reducing the risk of arcing or melting. The device is fully sealed with an IP67 rating and meets UL1604 standards for hazardous locations. This manual is written in Chinese.
| Rated Voltage Range | 12-800V DC |
|---|---|
| Storage Temperature | -70 to +150 °C |
| Mechanical Life | 1,000,000 cycles |
| Contact Resistance (Typical) | 0.11 to 0.2 mohms |
| Insulation Resistance | 100 Mohms |
| Dielectric Strength | 2,200 VRMS |
| Coil Voltage Options | 12, 24, or 48 VDC |
| Coil Power | 7.8 W |
| Housing Material | DuPont Nylon Zytel FR50 |
The contactor can reach an operating temperature of up to 175°C using EPIC® ceramic sealing technology.
No, the device includes built-in DC coil overvoltage suppression, so no extra diodes are needed.
No, the contactor is not sensitive to installation direction and can be installed in any orientation.
The current should be limited to below 1000A to avoid contact welding.