L5150GJ is a low dropout linear regulator with microprocessor control functions such as power on reset, low voltage reset, early warning, on/off control. Typical quiescent current is 55μA in very low output current mode and enabled regulator. It drops to 5μA with not enabled regulator. On chip trimming results in high output voltage accurancy (2%). Accurancy is kept over wide temperature range, line and load variation. Early warning circuit monitors the input voltage and compares it to an internal voltage reference. Output voltage reset threshold can be adjusted down to 3.5V by means of an external voltage divider. The maximum input voltage is 40V. The max output current is internally limited. Internal temperature protection disables the voltage regulator output. In addition, only low-value ceramic capacitor on output is required for stability.
The L5150GJ is a low dropout linear regulator designed for applications requiring precise output voltage regulation and microprocessor control features. It provides a regulated 5V output with a tolerance of +/-2% and includes built-in protection mechanisms such as thermal shutdown, short-circuit protection, and adjustable reset thresholds.
The device operates over a wide input voltage range from 5.6 V to 40 V and supports an output current up to 150 mA. Key features include programmable reset pulse delay via an external capacitor, early warning circuitry for monitoring input voltage levels, and low quiescent current consumption in both enabled and disabled states.
| Output voltage (typical) | 5 V +/- 2% |
|---|---|
| Max DC supply voltage | 40 V |
| Max dropout voltage | 500 mV |
| Output current capability | 150 mA |
| Quiescent current (enabled) | 55 uA |
| Operating temperature range | -40 °C to 150 °C |
The maximum input voltage is 40 V.
Yes, the output voltage reset threshold can be adjusted down to 3.5 V using an external voltage divider.
A ceramic capacitor with a value of 220 nF should be connected between the output and ground.