This is an installation guide for Dolphin Caddy, which introduces the steps of installing Caddy, including assembling, connecting power supply, fixing to the pool edge.
This manual provides instructions for the assembly of the DOLPHIN CADDY and the operation of the DOLPHIN Diagnostic 2001 and 3001 robot pool cleaners. It details how to position the power supply, assemble the CADDY frame, and correctly place the cleaner in the swimming pool for optimal cleaning performance. Important safety warnings regarding water temperature, electrical grounding, and avoiding operation out of water are included.
| Calculated Ground Speed | 50 ft/min |
|---|---|
| Calculated Scanning Rate | 63 ft2 /min |
| Suction Rate | 65.5 gal/min |
| Weight [w/o cable] | 20.8 lbs |
| Primary Voltage | 100 VAC / 115 VAC / 230 VAC |
| Secondary Voltage | 28 VDC - nominal |
| Rated output | 230 VAC - 150 W/ 115 VAC - 250 W |
| Optimum water temperature | 18˚C – 32˚C [64˚F – 90˚F] |
The DOLPHIN 2001 will automatically shut down after a work cycle of 6 hours.
The DOLPHIN 3001 will automatically shut down after a work cycle of 12 hours.
The power supply must be at a minimum distance of 3 meters [10 Ft.] from the edge of the pool.
Yes, the filter bag may be laundered using a regular synthetics wash-cycle.