The NCP1402 series are monolithic micropower step-up DC to DC converters that are specially designed for powering portable equipment from one or two cell battery packs. These devices are designed to start-up with a cell voltage of 0.8 V and operate down to less than 0.3 V. With only three external components, this series allow a simple means to implement highly efficient converters that are capable of up to 200 mA of output current at Vin = 2.0 V, VOUT = 3.0 V. Each device consists of an on-chip PFM (Pulse Frequency Modulation) oscillator, PFM controller, PFM comparator, soft-start, voltage reference, feedback resistors, driver, and power MOSFET switch with current limit protection. Additionally, a chip enable feature is provided to power down the converter for extended battery life. The NCP1402 device series are available in the Thin SOT-23-5 package with five standard regulated output voltages. Additional voltages that range from 1.8 V to 5.0 V in 100 mV steps can be manufactured.
The NCP1402 series are monolithic micropower step-up DC to DC converters specifically designed for powering portable equipment from one or two cell battery packs. These devices can start up with a cell voltage of 0.8 V and operate down to less than 0.3 V, utilizing only three external components.
| Output Current | 200 mA |
|---|---|
| Efficiency | 85% |
| Output Voltage Accuracy | +/- 2.5% |
| Converter Ripple | 30 mV |
| External Components Required | Three |
The device can start up with a cell voltage of 0.8 V.
The converter is capable of up to 200 mA of output current at specific conditions.
Only three external components are required for implementation.