NCV8501 is a family of precision micropower voltage regulators. Their output current capability is 150 mA. The family has output voltage options for adjustable, 2.5 V, 3.3 V, 5.0 V, 8.0 V, and 10 V. The output voltage is accurate within ± 2.0% with a maximum dropout voltage of 0.6 V at 150 mA. Low quiescent current is a feature drawing only 90 µA with a 100 µA load. This part is ideal for any and all battery operated microprocessor equipment. Microprocessor control logic includes an active RESET (with DELAY), and a flag monitor which can be used to provide an early warning signal to the microprocessor of a potential impending RESET signal. The use of the flag monitor allows the microprocessor to finish any signal processing before the RESET shuts the microprocessor down. The active RESET circuit operates correctly at an output voltage as low as 1.0 V. The RESET function is activated during the power up sequence or during normal operation if the output voltage drops outside the regulation limits. The regulator is protected against reverse battery, short circuit, and thermal overload conditions. The device can withstand load dump transients making it suitable for use in automotive environments. The device has also been optimized for EMC conditions.
The NCV8501 is a family of precision micropower voltage regulators with an output current capability of 150 mA. The family offers output voltage options for adjustable settings or fixed voltages of 2.5 V, 3.3 V, 5.0 V, 8.0 V, and 10 V. The output voltage is accurate within +2.0% with a maximum dropout voltage of 0.6 V at 150 mA.
| Output Current Capability | 150 mA |
|---|---|
| Output Voltage Options | Adjustable, 2.5 V, 3.3 V, 5.0 V, 8.0 V, 10 V |
| Output Voltage Accuracy | +2.0% |
| Maximum Dropout Voltage | 0.6 V |
| Quiescent Current (Low Load) | 90 µA |
| Operating Temperature Range | -40 to +150 °C |
| Input Voltage Range | -15 to 45 V |
The maximum output current capability is 150 mA.
The available fixed output voltage options are 2.5 V, 3.3 V, 5.0 V, 8.0 V, and 10 V.
Yes, it includes an active RESET circuit that operates correctly at an output voltage as low as 1.0 V.