The MP-M pressure intensifier is an In-Line model, designed to be positioned in a low pressure hydraulic system, and will provide high pressure exactly where needed. The MP-M will automatically increase a supplied pressure to the higher end pressure required (max. 800 bar).
The MP-M pressure intensifier is an in‑line hydraulic device designed for low‑pressure systems. It automatically increases supplied pressure to a higher end pressure (max. 800 bar) and can be installed in existing or new circuits using low‑pressure side valves.
The unit is offered with five standard intensification ratios (1.8, 3.4, 4.0, 5.0, 7.0) and optional ratios on request. All connections are 3/8" BSP, filtration must meet 10 µm nominal (max 19/16 ISO 4406), and flow/pressure values vary with fluid viscosity as shown in the table.
| Maximum Output Pressure | 800 bar |
|---|---|
| Connection Size | 3/8" BSP |
| Filtration Requirement | 10 µm nominal, max 19/16 ISO 4406 |
| Standard Intensification Ratios | 1.8, 3.4, 4.0, 5.0, 7.0 |
It can deliver up to 800 bar of pressure.
The standard ratios are 1.8, 3.4, 4.0, 5.0 and 7.0.
A 10 µm nominal filter, maximum 19/16 according to ISO 4406, is required.