This device manual is divided into several sections, including device setup, software installation and network settings, copying and printing instructions, and troubleshooting.
This manual covers all aspects of using the Canon imageCLASS MF8180C multifunction device, including initial setup, software installation, copying, printing, scanning, and network configuration. Safety warnings, paper handling guidelines, and detailed component descriptions are also included.
The document is organized into chapters such as Introduction, Paper Handling, Document Handling, Printing from a Computer, Copying, Scanning, System Monitoring, Maintenance, Troubleshooting, Device Settings, and an Appendix with technical specifications. This manual is written in Chinese.
| Device type | Personal desktop |
|---|---|
| Platen glass resolution | ≈600 × 600 dpi |
| Maximum paper weight (multi‑purpose tray) | 163 g/m² |
| First copy time (mono) | ≈21 seconds |
| Pre‑heat time | ≈60 seconds |
| Maximum paper size | A4 (210 mm × 297 mm) |
| Supported paper weight (paper tray) | 60 g/m² – 105 g/m² |
Please check that the paper size, thickness, and type conform to the device’s technical specifications (see “Printing Media Requirements”, p. 2‑1).
Make sure the toner cartridge is installed correctly (see the Quick Start Guide).
Refer to the “Replace Toner Cartridge” section (p. 8‑3) and replace the cartridge if needed.
Use the [Contrast] key to adjust contrast correctly (see “Adjust Contrast (Density)”, p. 5‑3).