The Molex 41695 crimp terminal housing provides a 3.96 mm (0.156") pitch KK connector with options for locking ramps, polarizing ribs, and voids. It is compatible with Molex KK headers and 1.14 mm pins and is offered in configurations from 2 to 24 circuits.
The specification sheet lists electrical ratings (250 V AC, 7 A phosphor‑bronze, 5 A brass), mechanical forces, material options (polyester or nylon housing), and environmental test requirements, helping designers select the appropriate part for their PCB or wire‑to‑board assemblies.
| Voltage rating | 250 V AC max. |
|---|---|
| Current rating (phosphor bronze) | 7.0 A max. |
| Dielectric Withstanding Voltage | 1500 V AC |
| Insulation Resistance | 500 kΩ min. |
| Contact Insertion Force | 1.8 kg (4 lb) max. |
| Contact Retention to Housing | 3.6 kg (8 lb) min. |
| Mating Force (square pin) | 2.25 lb max. |
| Unmating Force (square pin) | 0.84 lb min. |
| Normal Force | 0.75 kg (1.65 lb) |
| Durability (cycles) | 25 cycles max. |
| Operating Temperature | 0 °C to +75 °C |
| Housing Material | Polyester (UL 94‑V‑0) or Nylon (UL 94‑V‑2) |
The housing is rated for up to 250 V AC.
A phosphor‑bronze contact can carry up to 7 A.
The part operates from 0 °C to +75 °C.
The contact insertion force is up to 1.8 kg (4 lb).